Product Details:
Size | 126MM |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Warranty | 1 Year |
Weight | 1.66LB / 0.75 Kg |
Motor | .3 HP reverse running offset motors |
Product Details:
Size | 1.58mm |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Grade | Available in 4 sizes |
Over All Length | 6.35 12.7 19.0 25.4 38.1 mm |
Note | SOCKET HEX MUST MATCH COLLAR HEX |
Product Details:
Minimum Order Quantity | 1 Piece |
Color | Steel |
Warranty | 6 Months |
Std Pkg | 10 |
Size | 6 Inch |
Usage/Application | Aerospace |
Material | High Speed Steel |
Maximum Cutting Capacity | 5/32'', 3/16'', 1/4'', 5/16'', and 3/8'' |
Set of 5 protrusion gauges for nominal diameter Hi-Lite® fasteners, sizes: 5/32'', 3/16'', 1/4'', 5/16'', and 3/8'' . Replaces Hi-Shear® 2-1522HST Gauge Set.
Pin Protrusion Gauges from Omega Technologies are manufactured for use on all types of frangible and torque-control fasteners. These gauges determine if the correct length pin has been installed by determining if the pins projection is between allowable minimum and maximum ranges shown on the gauge.
Gauges are available for Hi-Lok®, Hi-Lite®, and Hi-Tigue® systems. To select the correct gauge for the fastener, select the one that corresponds to the appropriate pin diameter. If the pin falls short of the minimum limit or exceeds the maximum, it must be removed, and a more appropriate size selected.
Exceeding the maximum limit requires a shorter pin, and falling short the minimum limit requires a longer pin. The correct pin will lie between the maximum and minimum limitations giving a proper ratio of grip to protrusion. These are complete sets that include gauges for -5 to -12 fasteners. Related part number 2-1522-B.
Constructed of full-hard, electro-chem etched, 301 stainless steel for durability, these gauges are assembled on a chain for easy selection and use. A large hole facilitates manipulation of the leaves, and extra large RED markings facilitate correct gauge selection. Rounded corners reduce risk of scratching surrounding surfaces. Gauges are .88" high and .88'' wide.
Additional Information:
Product Details:
Size | .317 inch /8.05mm Center to Edge Distance |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Warranty | 1 Year |
Torque | 60 Inch Lbs/6.77 Nm |
Motor rpm | 500 RPM straight motor |
Product Details:
Size | .366 inch/9.30mm Center to Edge Distance |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Warranty | 1 Year |
Motor RPM | 500 RPM straight motor |
Torque | 60 Inch Lbs/6.77 Nm |
Note: You must select a nose gear to order an attachment. See the nose gear tables for information on the variety of ways our attachments will adapt to your fastener.
Note: You must select a nose gear to order an attachment. See the nose gear tables for information on the variety of ways our attachments will adapt to your fastener.
Product Details:
Size | .317 inch/8.05mm Center to Edge |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Warranty | 1 Year |
Torque | 120 Inch Lbs/13.55 Nm |
Motor rpm | 500 RPM offset motor |
Note: You must select a nose gear to order an attachment. See the nose gear tables for information on the variety of ways our attachments will adapt to your fastener.
Product Details:
Size | 350 Inch Lbs/39.54 Nm |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Warranty | 1 Year |
Torque | 350 Inch Lbs/39.54 Nm |
Motor rpm | 250 RPM Motor |
Note: You must select a nose gear to order an attachment. See the nose gear tables for information on the variety of ways our attachments will adapt to your fastener.
Product Details:
Size | 19993 1"x 1/2" 20 Degree Ratchet Attachment |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Warranty | 1 Year |
Weight | 1.27 Kg |
Motor RPM | 500 RPM Motor |
Product Details:
Size | 3/4" x 3/8" |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Warranty | 1 Year |
Motor RPM | 1000 RPM |
Weight in Kg | 1.26 |
TOOL # |
RPM Fastener |
RPM Motor |
TORQUE Nm |
WEIGHT Kg |
20053-20685 |
72 |
500 |
33.9 |
1.26 |
20054-20685 |
143 |
1000 |
23.7 |
1.18 |
20055-20685 |
286 |
2000 |
14.7 |
1.33 |
Product Details:
Size | 7/32" |
Brand | Jiffy Airtool |
Usage/Application | Aerospace assembly |
Warranty | 1 Year |
Over All Length | 1/4", 1/2", 3/4", 1 ", 1 1/2" |
Type | SOCKET HEX MUST MATCH COLLAR HEX |
Product Details:
Minimum Order Quantity | 1 Piece |
Type Of Hammer | Solid Rivet Hammer |
Handle Material | Pistol |
Head Weight | 1 kg |
Usage/Application | Aerospace |
Blows Per Minute | Depends on Riveting hammer (1x to 9x ) |
Cold Rivet Capacity | We will suggest suitable riveting hammer, if you share Solid rivet Size |
Energy Per Blow | 1x to 9x |
Brand | CHICAGO PNEUMATIC |
Additional Information: