Alva Engineers

·         500 rpm motor·         Develops 190 in lbs of torque·         Weighs 2.78 lbs·         12-1/2” overall length·         ”Leg” of tool is 1/2” thick and 3-1/2” long

OVERVIEW

• The G747 riveter is a compact, light duty, pneumatic- hydraulic tool designed, but not limited to, optimum installation of CherryMAX fasteners. 
• It features the “CherryMAX mounting system” supported by a wide variety of pulling heads and adapters supporting most of our blind fastening system

 

 

 

 

SPECIFICATIONS

• Air Pressure: 90 PSI (6.2 bar) min /110 PSI (7.6 bar) max
• Stroke: 0.437 inch (11.1 mm
• Pulling Force: 2100 lbs (9.34 kN) @ 90 PSI (6.2 bar) 
• Cycle Time: Approximately one second 
• Weight: 3.5 lbs (1.59 kg)
• Noise Level: 71 dB (A)
• Vibration: less than 2.5 m/s2
• Air Consumption: 0.09 SCF/cycle (2.55 L/cycle)

WARRANTY

• This rebuilt G747 comes with a one year warranty including parts and labor

-3300 rpm
- Used industry standard 1/4-28 threaded drill bits
- Full .4 horse power motor (most competitive models are 1/3 horse power)
- Rear exhaust
- Only 10.7" long from end to end
- Weighs just 1.6 lbs

REFURBISHED TOOL UNIT
OVERVIEW

 

• The Model 2012 is a lightweight, high speed production rivet installation tool.
• Using HUCK standard nose assemblies, it can install: -04 through -06 dia. Unimatic® blind rivets and blind bolts along with ASP® and TI-MATIC fasteners
• It is also able to pull -04 through -06 diameter HUCK-KLINCH® fasteners (including oversize HUCK-KLINCH) 
• **Pulling Head is sold separately** 

 

SPECIFICATIONS 

 

• Air Pressure: 90-100psi (620-690 kPa) 
• Stroke: .650" (16.5 mm)
• Pull Force: 2670 lbs (11 877N) 
• Consumption: 2.9 CFM @ 20 Cycles/Min
• Noise Level: 85 dbA at 90 psi 
• Weight: 4.4 lbs (4 kgs)

 

WARRANTY

• This rebuilt Huck 2012 comes with a one year warranty including parts and labor

OVERVIEW

 

• The Allfast/Olympic model RV14 is an installation tool developed to install the majority of blind rivets now in use.
• Using the recommended type pulling head, the RV14 installation tool will install 3/32 inch through 3/16 inch diameter standard and special Allfast/Olympic self-plugging and pull-thru blind rivets in a wide range of grips, as well as similar blind rivets manufactured by other companies.
• The RV14 installation tool is designed for maximum performance using Allfast/Olympic pulling heads of Group 1 (screw-on type) and Group 2 (snap-on type).

 

SPECIFICATIONS

• Pull Force : 1800 Lbs
• Stroke : 1.125"
• Rated Air Supply : 80-110 PSI
• Weight : 4 lbs

WARRANTY

• Comes with a one year warranty including parts and labor

Applications: Drilling, reaming, tapping and tube rolling for truck, tractor, railroad, oil refining machinery, building construction equipment and general construction industries.

• reversible self-closing roll throttle for one-hand control of throttling and reversing.
• governor-controlled motor conserves air at light loads, holds speed at heavier loads while increasing power
• dead handle supplied
• integral oil reservoir
• external grease fitting
• spade handle
• can be fitted with 5/8" or 3/4" Jacobs chucks