Alva Engineers

Product Features

• Equivalent to the Cherry G784 Riveter.
• Includes nosepieces to pull 1/8", 5/32", and 3/16" rivets.
• Pulls NAS 1700 series rivets to 3/16" diameter.
• Accepts Cherry nosepieces and accessories (sold separately).
• 2650 lbs pulling force.
• .938" stroke length

The GBP704 is a pneumatic-hydraulic tool designed specifically for the efficient installation of Cherrymax®, Allmax®, Huckmax®, and other Aerospace Rivets meeting NAS9301-9312, M7885, BACR15FP/FR & BACR15GF/GK. It weighs just over 4-1/2 lbs. and can be operated in any position with one hand. It has a .518" rivet setting stroke and a rated pull load of 3,136 pounds on 90 psi air pressure at the air inlet. The GBP704 riveter operates on a wide range of air pressure, with 90 to 120 psi providing the maximum efficiency. At 90 psi of air pressure, the GBP704 does not exceed 85 db and consumes 3.9 cfm at 20 cycles per minute.
NOTE: pulling heads are not furnished with this riveter and must be ordered separately.

The hydro-pneumatic Power Tool 3352PT-1 is designed to install metric Keenserts from sizes M5 to M12. Individual adjustments can be made using the integrated force control depending on size of the Keensert and hardness of the surrounding material. A specific nosepiece is required for each size and must be ordered separately.

Hydraulic 2580 Tool, pulls 3/16″ – 3/8″ dia. blind rivets & Huck bolt pins and collars. Weight: 6.58 lbs. Powered by Huck POWERIG. Separate nose assemblies required.

The Super LockForce 2580 is a lightweight tool for use in a wide range of high-speed production applications. Pulls 3/16" - 3/8" diameter fasteners.

• Powered by a Huck POWERIG Hydraulic Power System.
• Installs: Boms, Magna-Loks (3/8"), Floortights, Magna-Bulbs (5/16"), Magna-Grips, Hucktainers, and C6L pins & collars (5/16" & 3/8" only).
• Offset piston design allows it to fit in limited clearance applications.
• Nose assemblies are sold separately.
• Has only one moving part for increased reliability and minimal maintenance.

Parameters / Specs

Hydraulic 2600 Tool, pulls 5/16″ – 7/16″ dia. fasteners, including pins and collars. Powered by Huck POWERIG. Separate nose assemblies required.

The Super LockForce 2600 is a lightweight tool for use with a wide range of Huck blind fasteners and HuckBolt fasteners. Pulls 5/16" - 7/16" diameter fasteners.

• Powered by a Huck POWERIG Hydraulic Power System.
• Installs: Boms (5/16" & 3/8"), Magna-Grips (5/16" & 3/8"), C6L/C120 pins & collars (3/8" only), HP8 (3/8" & 7/16") and HP10.9 (10mm).
• Compact size allows it to fit into limited clearance applications.
• Nose assemblies are sold separately.

Parameters / Specs

Hydraulic 2620 Tool, pulls 1/2″ dia. fasteners & 3/8″ MG’s. Replaces FE5901 for pulling 1/2″.

The 2620 speed fastening tool replaces Model FE5901 for installing 1/2" product. Pulls 1/2" & 3/8" diameter fasteners.

• Powered by a Huck POWERIG Hydraulic Power System.
• Installs: Boms (1/2"), C50L pins & collars (1/2"), HP8 (1/2") and Magnagrips (3/8").
• Fully compatible with existing nose assemblies.
• Nose assemblies are sold separately.

Parameters / Specs

Hydraulic 2624 Tool, pulls 5/8″ & 16mm dia. fasteners. Powered by Huck POWERIG. Alternative to Models 585 & 586 for pulling 5/8″.

The 2624 Hydraulic Fastening Tool is an ergonomic alternative to the 585 or 586 tool for installing 5/8" products. Pulls 5/8" & 16mm diameter fasteners.

• Powered by a Huck POWERIG Hydraulic Power System.
• Installs: Boms (5/8"), HP8 (5/8"), C50L (5/8") and Huckfits (16mm).
• Fully compatible with existing nose assemblies.
• Nose assemblies are sold separately.

Parameters / Specs

Hydraulic 2630 Tool, pulls 7/8″ dia. fasteners. Powered by Huck POWERIG. Alternative to the 506 tool.

The Huck 2630 Hydraulic Tool is a lightweight ergonomic alternative to the Huck 506 tool for installing 7/8" diameter products.

The new line of tooling is fully compatible with existing nose assembly #99-5014 for 7/8" C50L's.

Parameters / Specs

 

Offset nosepieces are used to clear obstructions that are in line with the normal pulling axis of the riveter. This pulling head provides an offset of 1-15/32". Overall length is 4-3/8". Pulls all nominal and oversize Cherrymax rivets from 1/8" (-4) to 3/16" (-6). Works with the following riveters: GBP model GBP704, Cherry models G701A, G704B, G749A and G845A. 1 lbs (0.5Kg) shipping weight.

Cherry Aerospace Rivet Gun – Riveter H781A-456 Offset Pulling Head Nose Assembly fits directly on the G701, G704B, G746, G747 and G749 CherryMax® riveters

CALL FOR PRICING

  

Cherry Aerospace Rivet Gun – Riveter H781A-456 Offset Pulling Head Nose Assembly fits directly on the G701, G704B, G746, G747 and G749 CherryMax® riveters and to the G750A hand riveter with 750A-088 adapter.

SKU: H781A-456Categories: Cherry Aerospace AB Riveter- Rivet Gun Pulling Head, Cherry Aerospace CherryMax Riveter - Rivet Gun Pulling Heads, Cherry Aerospace Riveter - Rivet Gun Pulling Head, Cherry Aerospace Riveter - Rivet Gun SST Pulling Heads, Cherry Aerospace Riveter Pulling Head, Cherry MaxiBolt Aerospace Riveter - Rivet Gun Pulling HeadsBrand: Cherry Aerospace

Hydraulic 2628 Tool, pulls 1/2″ – 3/4″ dia. fasteners. Powered by Huck POWERIG.

The 2628 Hydraulic Tool is an ergonomic alternative to the 585 or 586 tool for installing 3/4" product. Pulls fasteners ranging from 1/2" to 3/4" in diameter.

• Powered by a Huck POWERIG Hydraulic Power System.
• Installs: Boms (5/8" & 3/4"), C50L pins & collars (1/2"-3/4), HP8 (1/2"-3/4") and Huckfits (3/4").
• Fully compatible with existing nose assemblies.
• Nose assemblies are sold separately.

Parameters / Specs

The Cherry G784 Hydro-Shift Riveter is a pneumatic-hydraulic tool designed for the efficient installation of CherryLOCK® Rivets. Its durable, all metal housing makes this tool extremely robust for use in shop environment. It will install nearly all diameters of CherryLOCK® Rivets up to a half-inch grip. This powerful tool has been designed with many ergonomic features: lower weight, less recoil, low noise, and a comfortable fit in theoperator’s hand. It can be operated in any position with one hand. With proper adapters and pulling heads, this tool will install other types of rivets including CherryMAX® Rivets. Specifications: 90 to 110 PSI (6.2 to 7.6 bar) operating pressure; 2600 lbs (11.57 kN) pulling force at 90 psi (6.2 bar); .875” (22.2mm) stroke length; 8 lbs (3.63 kg) weight.NSN: 5130-00-935-4681Recommended Nosepieces: H681-3C, -4C, -5C, and -6C for CherryLOCK®; H680B200A & 744-300 adapter for CherryMAX®.
8 lbs (4Kg) shipping weight.

A right angle nosepiece pulls at 90° to the normal pulling axis of the riveter.They are used in restricted areas, or when pulling from around a corner.The H753-456 has a head clearance of 2-1/4", and an overall length of 5-7/16".Pulls all nominal and oversize Cherrymax(r) rivets from 1/8" (-4) to 3/16" (-6).Works with the following riveters: GBP model GBP704, Cherry models G701A, G704B, G739A and G845A. 2 lbs (1Kg) shipping weight.

The Huck 3585PT Hydraulic Fastener Tool (Huck Gun) installs -20(5/8″) and -24(3/4″), 16MM to 20MM pintail-style Huckspin, Huckspin2, and Bobtail fasteners.

The reviews are in and customers are pleased with the new Huck 3585PT Hydraulic Fastener Tool (3585PT Huck Gun). The Huck 3585PT Hydraulic Fastener Tool (3585PT Huck Gun) installs -20(5/8") and -24(3/4") and 16MM to 20MM Huckspin, Huckspin2 and Bobtail lockbolts. The 3585PT does not have a pintail ejector as it is designed to install those fasteners without pintail break. The piston includes a pass through hole to allow the included T-wrench to install Huck-Spin collars.

Huck 3585PT Product Highlights

• Handle covers hoses to protect fittings
• Improved piston and cylinder-design for extended-life
• Nose adapter can be removed through the back of the tool for ease of repair

• Separate handle and cylinder design to keep handle cool during operation

• Fully compatible with existing nose assemblies.
• Nose assemblies are sold separately.

Parameters / Specs

The Huck 3585PT Hydraulic Fastener Tool (Huck Gun) installs -20(5/8″) and -24(3/4″), 16MM to 20MM pintail-style Huckspin, Huckspin2, and Bobtail fasteners.

The reviews are in and customers are pleased with the new Huck 3585PT Hydraulic Fastener Tool (3585PT Huck Gun). The Huck 3585PT Hydraulic Fastener Tool (3585PT Huck Gun) installs -20(5/8") and -24(3/4") and 16MM to 20MM Huckspin, Huckspin2 and Bobtail lockbolts. The 3585PT does not have a pintail ejector as it is designed to install those fasteners without pintail break. The piston includes a pass through hole to allow the included T-wrench to install Huck-Spin collars.

Huck 3585PT Product Highlights

• Handle covers hoses to protect fittings
• Improved piston and cylinder-design for extended-life
• Nose adapter can be removed through the back of the tool for ease of repair

• Separate handle and cylinder design to keep handle cool during operation

• Fully compatible with existing nose assemblies.
• Nose assemblies are sold separately.

Parameters / Specs

The SF20 sets 12mm, 14mm, 16mm, 1/2″ & 5/8″ Bobtails.

Huck model SF20 Bobtail tool is in stock! Huck SF20 Bobtail lock bolt tool is a hydraulic tool that sets 12mm, 14mm, 16mm, 1/2" & 5/8" Bobtail lock bolts. The SF20 tool works with nosepieces #99-7880 and #99-7880CX for 12mm Bobtails, nosepieces #99-7884 and #99-7884CX for 14mm Bobtails, nosepieces #99-7881 and #99-7881CX for 16mm Bobtails, nosepieces #99-7882 and #99-7882CX for 1/2" Bobtails, and nosepieces #99-7881 and #99-7881CX for 5/8" Bobtails

Parameters / Specs

Technical data:
• 3x400 V, 50 Hz
• P max. 700 bar
• Q max. 8.1 l
• LxWxH 710x610x1160 mm
• Weight: 284 kg (Bobtail)

Application:
• High volume flow
• Installation speed: fast / very fast
• For all diameters
• Extended ambient temperatures
• Chassis
• Crane eyes
• Permanent oil cooling
• Option: Oil heating
• Option: Setting process control

Technical data:
• P max. 700 bar
• Q max. 8.1 l

Not yet available
Planned for 2020/21

Application:
• High volume flow
• Installation speed: fast / very fast
• For all diameters
• Extended ambient temperatures
• Chassis
• Crane eyes
• Permanent oil cooling

Pneudraulic 256 Tool, pulls 3/16″ – 3/8″ dia. fasteners including pins and collars. Replaces Model 246.

The Model 256 Rivet Gun is designed for high-speed production applications, able to install up to 20 fasteners per minute.

• Pulls 3/16” through 3/8" diameter fasteners.
• Installs: 5/16 “ & 3/8” Magna-Loks, Boms, Magna-Bulbs, Hucktainers, 5/16” & 3/8” C6L’s, Magna-Grips (even steel 3/8”), and Floortights.
• Provides optimum stroke for one-cycle installations.
• Features a concentric (inline) pull piston
• Plated piston rods extend seal life.
• Nose Assemblies sold separately.

  We are an authorized Huck Tool Repair Service Center.

  Call us for all your riveting and fastener needs.

Parameters / Specs

Hydraulic 2480 Tool, pulls 3/32″ – 1/4″ dia. blind rivets & Huck bolt pins and collars. Light weight (2.21lbs). Powered by Huck POWERIG. Separate nose assemblies required.

The especially lightweight Model 2480 Huck Rivet Gun provides high-speed installation of Huck Fasteners ranging from 3/32" to 1/4" diameters.

• Powered by a Huck Power Rig Hydraulic System.
• Installs: Boms, Magna-Loks, Auto-clamps, Magna-Bulbs, Magna-Grips, Hucktainers, Grip-Rite (multi-grips), Stronghold (blind rivets), Peel rivets, A-Locks, and C6L pins & collars.
• For limited space production applications.
• Nose assemblies are sold separately.
• Has only one moving part for increased reliability and minimal maintenance.

Parameters / Specs

Pass Through Version; Hydraulic 2620-PT Tool, pulls 1/2″ dia. fasteners & 3/8″ MG’s. Replaces 5901 for pulling 1/2″.

The pass through version Model 2620-PT fastening tool replaces standard Model 5901. Pulls 1/2" & 3/8" diameter fasteners.

• Powered by a Huck POWERIG Hydraulic Power System.
• Installs: Boms (1/2"), C50L pins & collars (1/2"), HP8 (1/2") and Magnagrips (3/8").
• Fully compatible with existing nose assemblies.
• Nose assemblies are sold separately.

Parameters / Specs

Complete truck cab kit by Huck (#0650002) which gives you everything you need to start repairing your truck.

We provide an amazing Huck / AVK Complete Truck Cab Kit by Huck #065002 which gives you everything you need to start repairing your truck.

Nose Assemblies: 3/16" magnagrip 99-1456, 1/4" magnagrip 99-1458, 3/16" C6L 99-3003, 3/16" & 1/4" magnalok 99-3487, and the 2025 Huck rivet gun.

Rivets in kit: 3/16" magnagrips, 1/4" magnagrips, 3 sizes stainless for grill, 1/4" stainless magnlok, threaded insert tools.

Parameters / Specs

 

Sets: 14mm Huckspin2 Includes: 940 PoweRig, 3586PT tool, 15ft hose, 99-7531 nose assembly & 99-7531CC collar cutter, pressure gauge.

HuckSpin Truck Repair Kit & System

This fastener repair system is made to Remove & Repair Huckspin2 fasteners.

Kit Includes:

• 3585PT Huck Gun - a hydraulic installation tool with removable adapter, pass-thru stroke. Designed for repair, it sets Huckspin, HS2, and Bobtail fasteners.
• 940 Power Rig - provides hydraulic power to set the fastener
• 99-7521 Nose Assembly - sets 14mm HS2
• 99-7521CC collar cutter
• 127444 Pressure Gauge
• 15ft Hose

Other nose assemblies available to set 1/2" thru 20mm Huck-Spin & HucksSpin2.

Parameters / Specs

 

Sets: 5/8″ Huckspin2 Includes: 940 PoweRig, 3586PT tool, 15ft hose, 99-7521 nose assembly, pressure gauge.

HuckSpin Truck Repair Kit & System

This fastener repair system is made to Remove, Repair, and Re-install Huckspin and Huckspin2 fasteners.

Kit Includes:

• 3585PT Huck Gun - a hydraulic installation tool with removable adapter, pass-thru stroke. Designed for repair, it sets Huckspin, HS2, and Bobtail fasteners.
• 940 Power Rig - provides hydraulic power to set the fastener
• 99-7521 Nose Assembly - sets 5/8" HS2
• 127444 Pressure Gauge
• 15ft Hose

Other nose assemblies available to set 1/2" thru 20mm Huck-Spin.

Parameters / Specs

 

Pulls 3/32" countersunk or universal head Cherrylock rivets. The H681 series pulling heads are used to install 2000 series Cherrylock rivets. A separate pulling head is required for each diameter of rivet. Fits the following riveters: GBP models GBP784, and Cherry models G784. 2 lbs (1Kg) shipping weight.

Huck version of Cherry H83B-5MB Pulling Head. Pulls 5/32" Bolts. For use with G83 and G84 Cherry Riveters, or with Huck Riveters. Pulls MaxiBolts, Huck A286, MS90353, MS90354, MS21140, and MS21141 Blind Bolts. 2 lbs (0.5Kg) shipping weight.

Replaces H83A-6MB. Pulls 3/16" Bolts. For use with G83A and G84 Cherry Riveters. Pulls MaxiBolts, Huck A286, MS90353, MS90354, MS21140, and MS21141 Blind Bolts. 2 lbs (0.5Kg) shipping weight.

99-1290 Nose Assembly. Pulls 1/4″ Magna-grips with Model 246 & 256.

The Huck 99-1290 Nose Assembly pulls 1/4"" Huck Magna-grips with the following Huck tool models

• 246
• 256

99-3201 Nose Assembly. Pulls 3/16″ Magna-grips with Model 2025.

The Huck 99-3201 nose assembly pulls 3/16" magna-grips with the tool model 2025.

99-3202 Extended 6″ Nose Assembly. Pulls 3/16″ Magna-grips with Model 2025.

99-3300 Nose Assembly, pulls 3/16″ Magna-loks & Magna-bulbs with Models 2025, & 2480 (Magna-bulb only).

The Huck 99-3300 Nose Assembly pulls 3/16": Magna-loks and Magna-bulbs with the following Huck tool models:

• 2025
• 2480 (Magna-Bulbs only)

99-3303 Nose Assembly. Pulls 3/16″ Magna-loks, 3/16″ & 1/4″ auto-bulbs, and 3/16″ magna-bulbs.

The Huck 99-3303 Nose Assembly pulls 3/16" Magna-loks with the following Huck tools:

• Models 2025, & 2480.
• Pulls 3/16 & 1/4 auto-bulbs with Models 202 and 2022.
• Pulls 3/16" Magna-bulbs with Model 202.

99-3305 Nose Assembly, pulls 1/4″ Magna-loks; 3/16″ & 1/4″ Auto-bulbs; & 1/4″ Magna-bulbs

The Huck 99-3305 Nose Assembly pulls the following:

• 1/4" Magna-loks with Models 212, 2480, & 2025
• 3/16" & 1/4" Auto-bulbs with Model 2025
• 1/4" Magna-bulbs with Model 212

99-3438 Nose Assembly, pulls 3/8″ Hucktainers with Models 246, 255, 256, & 2580.

The Huck 99-3438 Nose Assembly pulls 3/8" Hucktainers with the following Huck tools models: 246, 255, 256, & 2580.

99-3452 Nose Assembly. Pulls 5/16 Floor-tights with Models 246, 255, 256, & 2580.

The Huck 99-3438 Nose Assembly pulls 5/16" Floor-tights with the following Huck tool models: 246, 255, 256, & 2580.

99-3465 Nose Assembly. Pulls 3/8″ Hucktainers with Model 256.

The Huck 99-3464 Nose Assembly pulls 3/8" Hucktainers with the Huck tool model 256.

99-3487 Dual Nose Assembly. Pulls 3/16 & 1/4 Magna-loks with Models 202, 2022, 2480, & 2025. Replaces Part #99-3316-68 & #99-3321-68.

The Huck 99-3487 Dual Nose Assembly pulls 3/16" and 1/4" Magna-loks with the following Huck 2025, as well as models 202, 2022, and 2480.

99-5008 Nose Assembly. Pulls 5/8″ C50L's with Models 2624 & 2628.

The Huck 99-5008 Nose Assembly pulls 5/8" C50L's with the following Huck tools models 2624 & 2628.

99-5301 Nose Assembly. Pulls 16mm Huckfits with Model 2624 & 5/8″ HP8's with Models 2624 & 2628.

The Huck 99-5301 Nose Assembly pulls 5/8" HP8's with Models 2624 & 2628 and 16mm Huckfits with Model 2624.

Huck Pneudraulic tools are used to install a range of Huck Blind Fasteners and LockBolts up to 9.5mm diameter. 

They are lightweight and ergonomic to assist operators during installation.