Alva Engineers

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 45 ccm³Direction of rotation: rightControl type: DR-pressure controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2A11-045ROperating pressure 280 barMax. pressure 350 barDisplacement flow 45.0 ccmDirection of rotation rightMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 3,000 rpmMax. volume flow at n0 max. 117 l/minMax. power (at delta p=280bar) at n0 max. 55,0 kWMax. power (at delta p=280bar) at 1,500 rpm 32.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406;; 9 NAS 1638Shaft type SAE 1"Mounting thread -at side position- metricControl type DR-pressure controlSealing material VitonWeight (without oil filling) 23.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 45 ccm³Direction of rotation: leftControl type: DR-pressure controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2A11-045LOperating pressure 280 barMax. pressure 350 barDisplacement flow 45.0 ccmDirection of rotation leftMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 3,000 rpmMax. volume flow at n0 max. 117 l/minMax. power (at delta p=280bar) at n0 max. 55,0 kWMax. power (at delta p=280bar) at 1,500 rpm 32.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406;; 9 NAS 1638Shaft type SAE 1"Mounting thread -at side position- metricControl type DR-pressure controlSealing material VitonWeight (without oil filling) 23.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 45 ccm³Direction of rotation: rightControl type: DFR-pressure flow controlShaft type: Spline shaftSealing material: Viton


Technical DataORDER NO. S-2A12-045ROperating pressure 280 barMax. pressure 350 barDisplacement flow 45.0 ccmDirection of rotation rightMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 3,000 rpmMax. volume flow at n0 max. 117 l/minMax. power (at delta p=280bar) at n0 max. 55,0 kWMax. power (at delta p=280bar) at 1,500 rpm 32.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406;; 9 NAS 1638Shaft type SAE 1"Mounting thread -at side position- metricControl type DFR- Pressure flow controlSealing material VitonWeight (without oil filling) 23.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 45 ccm³Direction of rotation: leftControl type: DFR-pressure flow controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2A12-045LOperating pressure 280 barMax. pressure 350 barDisplacement flow 45.0 ccmDirection of rotation leftMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 3,000 rpmMax. volume flow at n0 max. 117 l/minMax. power (at delta p=280bar) at n0 max. 55,0 kWMax. power (at delta p=280bar) at 1,500 rpm 32.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406;; 9 NAS 1638Shaft type SAE 1"Mounting thread -at side position- metricControl type DFR- Pressure flow controlSealing material VitonWeight (without oil filling) 23.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 45 ccm³Direction of rotation: rightControl type: DR-pressure controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2B11-045ROperating pressure 280 barMax. pressure 350 barDisplacement flow 45.0 ccmDirection of rotation rightMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 3,000 rpmMax. volume flow at n0 max. 117 l/minMax. power (at delta p=280bar) at n0 max. 55,0 kWMax. power (at delta p=280bar) at 1,500 rpm 32.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406;; 9 NAS 1638Shaft type SAE 1"Mounting thread -at side position- UNCControl type DR-pressure controlSealing material VitonWeight (without oil filling) 23.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 45 ccm³Direction of rotation: leftControl type: DR-pressure controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2B11-045LOperating pressure 280 barMax. pressure 350 barDisplacement flow 45.0 ccmDirection of rotation leftMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 3,000 rpmMax. volume flow at n0 max. 117 l/minMax. power (at delta p=280bar) at n0 max. 55,0 kWMax. power (at delta p=280bar) at 1,500 rpm 32.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406;; 9 NAS 1638Shaft type SAE 1"Mounting thread -at side position- UNCControl type DR-pressure controlSealing material VitonWeight (without oil filling) 23.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 45 ccm³Direction of rotation: rightControl type: DFR-pressure flow controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2B12-045ROperating pressure 280 barMax. pressure 350 barDisplacement flow 45.0 ccmDirection of rotation rightMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 3,000 rpmMax. volume flow at n0 max. 117 l/minMax. power (at delta p=280bar) at n0 max. 55,0 kWMax. power (at delta p=280bar) at 1,500 rpm 32.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406;; 9 NAS 1638Shaft type SAE 1"Mounting thread -at side position- UNCControl type DFR- Pressure flow controlSealing material VitonWeight (without oil filling) 23.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 45 ccm³Direction of rotation: leftControl type: DFR-pressure flow controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2B12-045LOperating pressure 280 barMax. pressure 350 barDisplacement flow 45.0 ccmDirection of rotation leftMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 3,000 rpmMax. volume flow at n0 max. 117 l/minMax. power (at delta p=280bar) at n0 max. 55,0 kWMax. power (at delta p=280bar) at 1,500 rpm 32.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406;; 9 NAS 1638Shaft type SAE 1"Mounting thread -at side position- UNCControl type DFR- Pressure flow controlSealing material VitonWeight (without oil filling) 23.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 74 ccm³Direction of rotation: rightControl type: DR-pressure controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2A11-074ROperating pressure 280 barMax. pressure 350 barDisplacement flow 74.0 ccmDirection of rotation rightMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,200 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. volume flow at n0 max. 162 l/minMax. power (at delta p=280bar) at n0 max. 76,0 kWMax. power (at delta p=280bar) at 1,500 rpm 52.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406; 9 NAS 1638Shaft type SAE 1 1/4"Mounting thread -at side position- metricControl type DR-pressure controlSealing material VitonWeight (without oil filling) 34.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 74 ccm³Direction of rotation: leftControl type: DR-pressure controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2A11-074LOperating pressure 280 barMax. pressure 350 barDisplacement flow 74.0 ccmDirection of rotation leftMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,200 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. volume flow at n0 max. 162 l/minMax. power (at delta p=280bar) at n0 max. 76,0 kWMax. power (at delta p=280bar) at 1,500 rpm 52.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406; 9 NAS 1638Shaft type SAE 1 1/4"Mounting thread -at side position- metricControl type DR-pressure controlSealing material VitonWeight (without oil filling) 34.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 74 cm³Direction of rotation: rightControl type: DFR-pressure flow controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2A12-074ROperating pressure 280 barMax. pressure 350 barDisplacement flow 74,0 ccmDirection of rotation rightMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,200 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. volume flow at n0 max. 162 l/minMax. power (at delta p=280bar) at n0 max. 76.0 kWMax. power (at delta p=280bar) at 1,500 rpm 52.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406; 9 NAS 1638Shaft type SAE 1 1/4"Mounting thread -at side position- metricControl type DFR- Pressure flow controlSealing material VitonWeight (without oil filling) 34,0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 74 ccm³Direction of rotation: leftControl type: DFR-pressure flow controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2A12-074LOperating pressure 280 barMax. pressure 350 barDisplacement flow 74.0 ccmDirection of rotation leftMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,200 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. volume flow at n0 max. 162 l/minMax. power (at delta p=280bar) at n0 max. 76,0 kWMax. power (at delta p=280bar) at 1,500 rpm 52.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406; 9 NAS 1638Shaft type SAE 1 1/4"Mounting thread -at side position- metricControl type DFR- Pressure flow controlSealing material VitonWeight (without oil filling) 34.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 74 cm³Direction of rotation: rightControl type: DFR-pressure flow controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2B12-074ROperating pressure 280 barMax. pressure 350 barDisplacement flow 74,0 ccmDirection of rotation rightMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,200 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. volume flow at n0 max. 162 l/minMax. power (at delta p=280bar) at n0 max. 76.0 kWMax. power (at delta p=280bar) at 1,500 rpm 52.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406; 9 NAS 1638Shaft type SAE 1 1/4"Mounting thread -at side position- UNCControl type DFR- Pressure flow controlSealing material VitonWeight (without oil filling) 34,0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 74 cm³Direction of rotation: rightControl type: DR-pressure controlShaft type: Spline shaftSealing material: Viton

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 74 ccm³Direction of rotation: leftControl type: DFR-pressure flow controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2B12-074LOperating pressure 280 barMax. pressure 350 barDisplacement flow 74.0 ccmDirection of rotation leftMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,200 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. volume flow at n0 max. 162 l/minMax. power (at delta p=280bar) at n0 max. 76,0 kWMax. power (at delta p=280bar) at 1,500 rpm 52.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406; 9 NAS 1638Shaft type SAE 1 1/4"Mounting thread -at side position- UNCControl type DFR- Pressure flow controlSealing material VitonWeight (without oil filling) 34.0 kg

Our hydraulic axial piston pump of type SVP is based on a swash plate design and is made for open circuit.The oil flow is proportional to speed and displacement which can be adjusted continously.Special features:- for open circuit- for mobile application- mounting flanges according to SAE- short response time- long lifetime- low noise levelEnergy source: HydraulicDisplacement flow: 74 ccm³Direction of rotation: leftControl type: DR-pressure controlShaft type: Spline shaftSealing material: Viton

Technical DataORDER NO. S-2B11-074LOperating pressure 280 barMax. pressure 350 barDisplacement flow 74.0 ccmDirection of rotation leftMax. speed at Vg max., at 1 bar absolute pressure at suction port (n0 max.) 2,200 rpmMax. speed at Vg max., at 1.5 bar absolute pressure at suction port (n0 max.) 2,600 rpmMax. volume flow at n0 max. 162 l/minMax. power (at delta p=280bar) at n0 max. 76,0 kWMax. power (at delta p=280bar) at 1,500 rpm 52.0 kWMin. inlet pressure (absolut) 0.85 barMax. inlet pressure (absolut) 5 barMax. drain line pressure (absolut) 2 barOperating temperature -10 up to +90 °COperating viscosity 16 up to 32 mm²/sViscosity limits, short-time 10 up to 1,000 mm²/sContamination class 18/15 according to ISO/DIS 4406; 9 NAS 1638Shaft type SAE 1 1/4"Mounting thread -at side position- UNCControl type DR-pressure controlSealing material VitonWeight (without oil filling) 34.0 kg